Basler A501kc Manual de usuario descargar pdf (Pagina 97)

Configuring the Camera

Basler A500k 4-1

PRELIMINARY

4 Configuring the Camera

A500k cameras come factory-set so that they will work properly for most applications with minor

changes to the camera configuration. For normal operation, the following parameters are usually

configured by the user:

• Exposure time control mode

• Exposure time (for ExSync programmable mode or free-run programmable mode)

• Long Exposure Compensation (A504

k, A503k only)

To customize operation for your particular application, the following parameters can also be

configured:

•Gain

• Offset

• DSNU Constancy and Shutterline Correction (A503

k only)

• Digital Shift

• Area of Interest

• Dynamic Area of Interest

• Area of Interest Stamp

• Flash Trigger

The camera is programmable via the serial port. Two methods can be used to change the

camera’s settings. The first and easier approach is to change the settings using the Camera

Configuration Tool Plus (CCT+). See section 4.1 for complete instructions on using the

configuration tool. You can also change the settings directly from your application using binary

commands. Section 4.2 lists the commands and provides instructions for their use.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 149 150

Sin comentarios

Basler A501kc Manual de usuario Pagina 97