Basler A600f Manual de usuario descargar pdf (Pagina 63)

Basic Operation & Standard Features

BASLER A600

f 3-39

DRAFT

When the 4:2:2 YUV ID is set in the Coding ID field of the Color Coding ID register for Format 7,

Mode 0, the camera outputs image data in the YUV 4:2:2 format at an average of 16 bits per pixel.

When the camera is operating in the YUV 4:2:2 or Raw 16 modes:

On the A601

fc, the maximum frame rate is 30 fps.

On the A602

fc, with the AOI is set to full resolution, the maximum frame rate is 50 fps.

Format 7, Mode 1

Format 7, Mode 1 is very similar to Format 7, Mode 0 with the exception of the available color

codings and how the color codings work.

Format 7, Mode 1 is parameterized by using the Format 7, Mode 1 control and status registers

(see page 4-35).

Color Codings

In Format 7, Mode 1, only the Mono 8 color coding is available and the color coding works

differently than the Mono 8 color coding available in Format 7, Mode 0.

When the Mono 8 ID is set in the Coding ID field of the Color Coding ID register for Format 7,

Mode 1, the camera outputs 8 bits per pixel and outputs the raw data for each pixel. The pixel data

is not processed to account for the color filter. (This type of output is sometimes called “Bayer 8.”)

This mode of operation is included on A601

fc and A602fc cameras for compatibility with versions

1.6 and below of the Basler BCAM 1394 driver software. These early versions of the BCAM

software cannot properly access the Raw 8 color coding. Instead, they require a Mono 8 color

coding that results in the output of raw pixel data.

The Raw 8 and Raw 16 color codings are defined in version 1.31 of the IIDC specifi-

cation.

Color code definitions can vary from camera model to camera model. This is especially

true for older models of Basler cameras.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 179 180

Sin comentarios

Basler A600f Manual de usuario Pagina 63