Basler SCOUT LIGHT Manual de usuario Pagina 74

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 228
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 73
Physical Interface AW00104701000
64 Basler scout light GigE
7.7 Input and Output Lines
7.7.1 Input Line
7.7.1.1 Voltage Requirements
Voltage Levels When the Standard Power and I/O Cable is Used
The following voltage requirements apply to the camera’s I/O input (pin 3 of the 12-pin receptacle):
Different voltage levels apply, depending on whether the standard power and I/O
cable or a PLC power and I/O cable is used (see below).
Voltage Significance
+0 to +24 VDC Recommended operating voltage.
+0 to +1.4 VDC The voltage indicates a logical 0.
> +1.4 to +2.2 VDC Region where the transition threshold occurs; the logical state is not defined in this
region.
> +2.2 VDC The voltage indicates a logical 1.
+30.0 VDC Absolute maximum; the camera may be damaged when the absolute maximum is
exceeded.
Table 6: Voltage Requirements for the I/O Input When Using the Standard Power and I/O Cable
Vista de pagina 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 227 228

Comentarios a estos manuales

Sin comentarios