Basler A620f Manual de usuario Pagina 93

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 144
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 92
Configuring the Camera
BASLER A620
f 4-39
DRAFT
Register Name: Strobe 1 Control
Offset from Base Address: 0x204
Field Bit Description
Same definitions and values as Strobe 0 Control.
Register Name: Strobe 2 Control
Offset from Base Address: 0x208
Field Bit Description
Same definitions and values as Strobe 0 Control.
Register Name: Strobe 3 Control
Offset from Base Address: 0x20C
Field Bit Description
Same definitions and values as Strobe 0 Control.
L
If a strobe signal is on, the signal will only be present on the associated output port
if the output port is configured for “strobe.” For example, if the Strobe 0 signal is
on, the signal will only be present on physical output port 0 if the port is configured
for “strobe”. If the Strobe 1 signal is on, the signal will only be present on physical
output port 1 if the port is configured for “strobe”. Etc.
See Section 6.7.10 for more information about configuring the output ports.
Vista de pagina 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 143 144

Comentarios a estos manuales

Sin comentarios