Basler A501k Manual de usuario descargar pdf (Pagina 110)

Configuring the Camera

4-12 Basler A500k

PRELIMINARY

4.2.4.2 Timer 1

4.2.4.3 Timer 2

Purpose: To set Timer 1 or to read the current Timer 1 setting. Timer 1 is used when the camera is

operating in ExSync programmable mode or in free-run mode. See section 3.2 for details.

Type: This is a read or write command.

Read Command: Cmd-ID R/W-Flag Data Length Data

0xA6 1 3 -

Response: Cmd-ID R/W-Flag Data Length Data

0xA6 0 3 3 Bytes

Write Command: Cmd-ID R/W-Flag Data Length Data

0xA6 0 3 3 Bytes

Response: None

Data Format: Byte 1 Low byte of the Timer 1 setting

Byte 2 Mid byte of the Timer 1 setting

Byte 3 High byte of the Timer 1 setting

Data Range: The timer 1 setting can range from 0x00000A to 0xFFFFFF µs. The

recommended maximum value is 0x0080E8 (33ms).

Purpose: To set Timer 2 or read the current Timer 2 setting. Timer 2 is used when the camera is

operating in free-run mode. See section 3.2 for details.

Type: This is a read or write command.

Read Command: Cmd-ID R/W-Flag Data Length Data

0xA7 1 3 -

Response: Cmd-ID R/W-Flag Data Length Data

0xA7 0 3 3 Bytes

Write Command: Cmd-ID R/W-Flag Data Length Data

0xA7 0 3 3 Bytes

Response: None

Data Format: Byte 1 Low byte of the Timer 2 setting

Byte 2 Mid byte of the Timer 2 setting

Byte 3 High byte of the Timer 2 setting

Data Range: The timer 2 setting can range from 0x000003 to 0xFFFFFF µs.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 149 150

Sin comentarios

Basler A501k Manual de usuario Pagina 110